Product Features

GENERAL DESCRIPTION

ECtools© (Earthquake Concrete tools) is a design software for Reinforced Concrete and Unreinforced Masonry Structures using either the European Norms (Eurocodes) or the ACI318-11& ASCE/SEI7-10 US norms. It aims to facilitate the practicing structural engineer or the design office in the correct application of the several clauses of these codes. It utilises the analysis results of either Scia Engineer© or - for the Eurocodes- ETABS©, and can be used in the following cases:

• Gravity loads design of Reinforced Concrete Buildings

• Wind Load design of Reinforced Concrete Buildings

• Seismic Design of Reinforced Concrete Buildings

• Pushover analysis of Reinforced Concrete & Composite Buildings

• Checking/Reviewing the Design of Reinforced Concrete Buildings
  

• Seismic Assessment and Retrofitting of existing Reinforced Concrete Buildings

• Seismic design of Composite buildings with Concrete Cores (The cores)

• Seismic design of Unreinforced Masonry Buildings

• Seismic Assessment and Retrofitting of existing Unreinforced Masonry Buildings

The complete set of video tutorials for Scia Engineer and ETABS may be found at our youtube channel or here.

 Click here to download the ECtools Technical brochure in pdf.

GENERAL ADVANTAGES

ECtools has been developed by 3PI. Ltd. which is a subsidiary of Penelis Consulting Engineers SA , a structural design office with projects in many EU and Non-EU countries with high seismic risk, such as Greece, Romania, Bulgaria, Croatia, Serbia, Cyprus, Egypt.

This means that ECtools is a product developed by structural engineers, aiming to satisfy the needs of structural engineers when dealing with large projects. It has been extensively tested within the design office and many Universities and its predecessor, eTools, has been in use since 2002 in Greece and Cyprus.

COUNTRIES OF APPLICATION

The Eurocodes program has allowed for some diversification within member states, thus introducing the National Annexes for each Eurocode. ECtools has incorporated those NAs for all EU countries.

Non EU countries, or EU countries without available NAs, can apply either the general suggestions of the Eurocodes, or a NA of their choice.

Additionally the clauses of ACI318-11 and ASCE/SEI 7-10 are applicable, through the IBC, to all US states as well as many international projects world wide.

LANGUAGE

The software menu and manual are in English, however the final calculation report, which is part of the design deliverables, can be produced in any language the user wishes, since it is very common for local authorities not to accept calculation reports in foreign languages.

Product description

Tweet